eprbulletsafsc.com

Air Force On-the-Job Training EPR Bullets

On-the-Job Training/Self Improvement

- Thirsty for knowledge; completed 40+ hrs of comm/networking CBT's--ready for site's next software upgrades
- Sets the example! Completed 45 hrs of CBTs w/95% avg; used tech knowledge to clear 120+ info sys outages
- Tackled trng outside AFSC; accomplished 46 hrs of CSA CBTs--provided after-hrs spt to 200 imagery analysts
- Attended 240-hr Sun UNIX course; developed critical advanced computer skills--resolved 100 trouble tickets

- Acquired task specific training; mastered tape cutting equipment methods--reduced tape detail fabrication 20%

- Attained B-2 LO/composite trng; mastered multiple stealth repair processes--strengthened B-2 technical skills

- Attained John L. Grover lift certification; utilized on life line inspections--reduced A/C rotation time by 50%

- Attained LO composite trng; utilized skills on delaminated elevon--averted flight control failure/saved $154K

- Attained mapper ground assessment trng; uploaded/download >200 deficiencies--increased sect's capes >5%

- Attained specialized trng; completed Soaring Solutions Tool Control prgm crs--improved turn over time 25%

- Attained Tier I material inspection sys trng; educated on equipment operation--enhanced B-2 organic abilities

- Attained training on TC-Max prgm; substantiated critical tool accountability--strengthened knowledge skill set

- Attended advanced composite class; used composite skills on leading edge disbond--returned strength/contour

- Attended advanced composite crse; utilized skills/repaired six tailpipe shrouds--saved $15M vs replacement

- Attended advanced composites crs; trained on removal/application composite plies--increased job knowledge

- Attended AGE fam class; educated on safety/operating procedures on 10 units--zero fails during personal eval

- Attended B-2 advanced composite course; utilized knowledge to install exhaust lip tile--slashed 3 repair hours

- Attended B-2 LO trng course; educated on thin-tape application--strengthened professional knowledge skill set

- Attended LO Introduction course; learned tape/coating application procedures--enhanced shop capability 8%

- Completed 40-hr Thales PRC-148 mx/ops software courses; honed mx skills--drove 100% shop task coverage

- Completed advanced composites class; utilized new skills on lightning strike patch--reduced repair time 10%

- Completed B-2 Advanced Composite course; learned ply orientation/stack-up--increased job knowledge 10%

- Completed bench stock training; overhauled 70 benchstock acquisitions--ensured assets were shipped on time

- Completed crew lead trng; led six mbr team--finished acft re-LO 7 wks early/facilitated 98% repair pass rate

- Completed heat treating course; trained in metal hardening--increased section's heat treating capability by 37%

- Completed Management Internal Control Tool trng; acquired tracking technique--increased flt proficiency 25%

- Completed online safety crs; gained substantial knowledge--bolstered section safety training effectiveness 20%

- Completed Precious Metals crs; secured assets valued >$110K--aced QA follow-up insp w/zero discrepancies

- Completed TC-Max trng; inspected/issued/controlled > 9.5K tools--facilitated security for $2.1M in wg assets

- Completed wg environmental safety course; implemented hazard reduction techniques--reduced waste by 10%

- Completed windscreen trng; applied skill/reduced process time by 33%--CSAF Team Excellence Awd Finalist

- Educated on aft deck inspection; applied ceramic putty to three tiles--alleviated $35K in replacement costs

- Educated on composites; applied skills on lightning strike patch--abated possible lightning intrusion to fuel tank

- Educated on diffuser stack-up; removed/applied coatings/iron filled elastomer--enabled on site unit change out

- Educated on precision measurement equipment; maintained 493 items value $900K--zero overdue calibrations

- Educated on tailpipe mapping; tracked/recorded/calculated damage--ensured immediate response capability

- Grasped exhaust lip tile replacement procedures; learned removal/pre-fitting criteria--reduced rework by 20%

- Hand picked by group to attend Automated Technical Management System 2000 course at Randolph AFB

- Hand-picked to receive Northrop trng; utilized skills on radome electromagnetic foam repair--slashed acft RCS

- KO'd flightline expeditor trng; performed 27 tile inspections/applied ceramic putty--safeguarded $2M aft deck

- KO'd Hazardous cargo/pallet trng; prepped package/eqpmt for dplymnt--displayed wg's readiness capabilities

- KO'd laser etcher trng; engraved >$64K of hazardous chemicals/materials--increased sect accountability 65%

- KO'd LO crs; advance skills critical to iron filled elastomer shroud repair--saved $2.5M in replacement costs

- Learned B-2 assessment procedures; identified/corrected 28 defects--restored critical conductive properties

- Obtained tailpipe repair trng; applied conductive coating mixing process--restored $2.3M due in from mx asset

- Participated in Sigma Tier-One class; learned LO resistance inspection--boosted section task knowledge 15%

- Received advanced composite training, preformed three composite duct scarf repairs--returned A/C to FMC

- Received mapper ground assessment training; processed upload/download info--sections capability up by 5%

- Received tailpipe bond arc training; mastered crucial prep/application skills--increased repair success by 30%

- Received TC-Max trng; inspected/issued/controlled >9.5K tools--facilitated security for $2.1M in wg assets

- Received training on General Dynamics SDS version 9 upgrade; increased data processing capability by 10%

- Received tubing trng; educated on removal/fabrication/fitting installation--added rare task to technical growth

- Selected for guide vane trng; utilized skills/injected adhesive to six defects--averted ingestion to $3.3M engine

- Selected for trng w/Signature Diagnostics flt; attained TOMIS trng held for NCOs--verified LO repair integrity

- Sought fastener training on T-38 jettison bracket; educated on Hi-Lok removal/installation--ensured crew safety

- Sought out lightning strike repair trng; applied bonded composite lay-up/wire mesh--negated fuel cell intrusion

- Sought sheet metal training on inner mold line repair; replaced loose fasteners--extended aft deck life 1K hours

- Sought sheet metal trng on A-10 panels; installed seven metal patches--improved structural repair capabilities

- Sought sheet metal trng; learned rare fastener installation techniques--improved structural repair capabilities

- Sought sheet metal trng; mastered exhaust wiggle strip repair technique--improved structural repair capabilities

- Sought tubing repair trng; utilized blending techniques on four hydro lines--added rare task to technical arsenal

- Trained on automated tubing bender; manufactured three fuel lines at field level--negated $16K in depot costs

- Trained on B-2 end-of-week assessment; identified/corrected 28 deficiencies--ensured 100% sortie generation

- Trained on B-2 signature diagnostics; learned Tier One inspections--ensured 100% repair verification was met

- Trained on conductive coating probe unit; learned proper calibrating techniques--verified LO repair integrity

- Trained on kapton procedures; accomplished application on hot trailing edge--guarded $2M composite deck

- Trained on stub seal removal; ensured proper procedures and torque value--improved section repair capability



We need more examples. Bullet statements may be contributed using this form. Thanks!